• 
Supermoto XL
Designs •
Bringing 3D designs closer to reality ( http://www.geocities.com/SupermotoXL )  
  ( http://4x4evo.net/smxl )  
 
author:  David Lim.  (SupermotoXL)  e-mail: davidlimars@hotmail.com
  • MAXXIMUS CD 16.0 XL-ATX

Released Date:    1 Mac 2008  

Read the information and instruction below before installing the car/truck POD file into 4x4 evolution1/2 game.  Please do take note that some special vehicle POD file comes in with separate manual sheet attached along with downloaded file so do check them in your attachment.  Else please check further extra information at our websites.
 
Disclaimer: The contained files are provided "as is" without warranty of any kind,  either expressed or implied. The author will not be held responsible for any losses incurred, either directly or indirectly by the use of these files.
 

 • In-game details
Game version - 4x4 EVO 1
Access - "CAREER" mode
Car access - under "NISSAN"
Vehicle name - MAXXIMUS CD 16.0 XL-ATX

 • Production details
Model version - Concept Design ver. 16.0
Prod. No - 22022008
Brand/Manufacturer - SupermotoXL
Vehicle name - MAXXIMUS CD 16.0 XL-ATX

 • Required graphic setting
Renderer - -
Color Depth - -
3D card - -
Reflection - OFF

 • Production Tools
3D program - Z-modeler 1.07
Texturing tools - Corel Photo-Paint
POD tool - PODTool.exe
-POD installer - PODini.exe
   
• Design History

It was funny incident on a day before this project was created which lead to reason why this models was designed.  This project was spawn because it was my desired for satisfaction for not able to grab my hands on replica of truck models i saw on the toy store.. a vent of frustration which leads to creation of this 4x4 off-roader.  Let's just say i'm dead broke to spend on such expensive R/C off-roader.....Sometimes if you can't have it just make one for yourself so i did.   I think afters years absent in design and creating an off-roader finally i've fired up my favorite modeler tools and make the baddest and most wicked 4x4 off-roader ever built on the planned.  Prefer to be rivalry of infamous HUMMER.

MAXXIMUS CD 16.0 XL-ATX (All Terrain Xtended) is a high tower 4x4 off-roader design to tackle various terrains ever challenge in the wild.  With higher ground clearance on the front and rear chassis prove an ideal design for various terrains application. Initially from the start  the truck suppose to be design as coupe 2 door type off-roader, but after thinking for two days wondering why  i should have a two door, since four door are much better at carrying loads and family based commercial value i just go ahead  with 4 door based design and added rear hatched canopy on the truck bed for family type 4x4 design in mind.  I tribute this new 4x4 design for my father because he always wanted a cool 4x4 dualcab pickup truck so he can cross country back to his green natural home on borneo island.  He likes  adventure.

THE DEVELOPMENT
There was interesting fact about the development of this truck. More importantly this model was built live progress where public can see step by step how this design and models was progress from embryo to mature state.  You can actually view how simple 3d boxes grow and  formed into complex 3d meshes which makes the shape of this  4x4 vehicle.  The models development started publicly on 22nd Jan 2008 and completed fully on 15th February 2008.  Its was by fastest and shortest duration of development ever made for complex models.  Previous record before this was 25 days.  You can view the development report and lifecycles  from my blog website or our local forum.  Anyways it was a challenge and its  the best way to get public interested into viewing how design and modeling works in SupermotoXL Design department.  Overall meshes the models was totaled around 45k just save below lagging limit lines.   To save some construction time i've used back several object meshes from my past 2  year old parts from XENO under carriage, suspension and engine...also the fact it have just enough polygon performance to save up any user PC from being cooked up CPU due to extensive lag on  high poly models.

THE DESIGN
MAXXIMUS was design to rival H2 HUMMER design, which is why this 4 wheeler have wider chassis track, long body length, sharp edgy body contour, more front and rear end clearance for obstacle climbing, wide disperse headlights,  higher suspension lift kit and big profile wheelsets.   The design have a mix of retro and concept taste.  Front facelift have almost an old skool style hollow type looks which belong similar category of muscle car like Concept Camaro, Challenger, Hemi or something feel phat or higher over your head feeling. The chassis shells was more edgy or something like aluminum box like style which at first reluctant to think about that design in mind but popular trend of rugged and rough edgy looks persuade me to continue follow with how 4x4 people would like to see on this vehicle.  Just like all of my design the rear lights remain circular in design, looks sporty and classic....its just my style.   I also added significant trace of "X" signature on my design just like other models i created previously on the front and rear chassis.  The trace of "X" marking can be seen as dark groove grilled top and  bottom inverted wide "V" marking which both combined as one horizontally sliced "X" mark.  For those who don't know "X" represent my signature as in "XL" or "SupermotoXL"..every designer leaves a bread crumbs.  The windows also looks more tuby hollow like the interior  styling of an aircraft cabin window panel.   port located above, behind the headlights beside the ‘X’ beam spoiler provide quick escape for heat dumping generated by the twin intercooler.

At the end of the design phase the truck overall looks more out of the box adventure truck really to roll over anything in its path.  Higher ground clearance on front and rear for easy vertical climbing.  Bigger tyre and rigid wheelsets.  Long body and aero dynamic rear truck bed canopy.  Full dual  four piston vented disc brake system.  Side wall  exhaust system. Wider body width and sturdy mainframe.  How do i feel about this design?...great!!  satisfied!!..95.99%..almost..well atleast it looks better and more off-roader looks than my old creation "XENO 2" which looks  way urban style bug shell off-roader.  Anyways if you look carefully "MAXXIMUS" share same engine, axle and suspension system as "XENO 2".  Yeah the good reasons is i'm too lazy to think about design and built another mechanical parts for it.  Its just another way to save my brain from over heat.  In 2008 i'll be looking foward to design more off-roader until each of these rides could impact the way people off-roadiing around the globe.

Peace and ride free.. 

Here's my advice ..."if you can't have one, build one'.

Live to design and share the passion.
 

 Enjoy your ride!
 
 ** PODini.exe is required to install *.POD files, for downloads, instruction and manual installation visit our websites.
A. Guidelines : Running EVO1 models in EVO2 game
** skip this if you're just using this models for 4x4 evo1.
EVO 2 game can actually run/accept EVO1 car/trucks but you'll need to disable certain feature in EVO2
   
1. To run EVO1 car/trucks make sure you turn off the "Truck Reflection" mode in the graphic setup menu.
2. On your EVO2 game screen click/go to [OPTIONS] >> [GRAPHICS] >> [TRUCK REFLECTIONS]
3. Set the [TRUCK REFLECTION] to "OFF (fastest)"
   
  Question: Why can't I enable Reflection option on EVO1 models in EVO2 game?
  Answer: Because EVO2 game does not support EVO1 car/truck's model texture file (*.RAW, *.ACT. *.OPA).
EVO1 does not contain standard EVO2 texture format (*.TIF)
 
 B. Guidelines : How to restore the hood and swing doors into closing position
When you purchase the car from the CAREER mode you'll find that the car front hood and doors are swing open by default. To keep the hood and the door closed into original position you'll need to follow the instruction below:
   
1. Purchase the vehicle then go back into your garage >> [GO HOME].
2. With you car selected, In the Home Garage menu select [INSTALL/REMOVE PARTS] >> [APPEARANCE] > [FENDER FLARES] >> [OFF] (set it to "off" to remove the swing/opened hood and doors)...
3. Exit home garage, then go back into the [GO SHOPPING] >> [BUY PARTS] >> [APPEARANCE] >> [BUSH GUARD] >> [YES] to buy and install the Bush Guard. (mean you buy parts like hood and door which set in closed down position).
4. So there you go. The next time you want to pose the car with hood and doors wide open just follow the instruction #(2) to reattached the parts and vice versa. (*don't install both "Fender Flares" and "Bushguard" parts together at the same time else the parts will intersect and may look weird).
    
• notice:  TUNING VEHICLE HANDLING AND PERFORMANCE
NEMIXIS comes with a stock driving, speed, braking and handling performance setup (*.TRK file).  I’m not really a good performance and handling tuner so I just design and build the vehicle only.  If you need to edit the these setting to suit your taste and or simply wanted to be a tuner you’re welcome to do so by extracting the POD file and edit the *.TRK configuration.  You don’t need any special permission from me (David L. ‘SupermotoXL’) to do that, so have fun with it.  Just remember when you need to upload the vehicle make sure you put proper credits. If you need to put it for commercial value let me know about it.  Enjoy the ride.
    
• notice:  LEGAL USAGE
You may freely use, edit , distribute, convert, host over the internet and other appropriate use for non-commercial purpose provided you should put/attached credits, details and links to the original author.  For latest information, rules or article related on obtaining approval/permission please do visit out website at http://www.geocities.com/SupermotoXL or http://4x4evo.net/smxl  .  You can also e-mail me at  davidlimars@hotmail.com .  Should you need to use it for commercial purpose please seek permission from me legally.
 
   
Should you require further information, please do not hesitate to contact me.  E-mail: davidlimars@hotmail.com

Fans and user can also can visit our friendly community forum at KC's vales 4x4evo2: http://vales.com/evo2 you can find me there if you need a quick contact and updates interactively. Have Fun!

 

* For more information on our latest designs, news, updates, services and other resources  please visit my site at http://www.geocities.com/SupermotoXL    |   http://4x4evo.net/smxl

• SupermotoXL Designs •

________________________________________________________________________________